Gr12 Liga tat-titanju Irrumblar bis-sħana u rolling kiesaħ Folja illustrata
Oct 22, 2025
GNEE jista' jipprovdi l-formola
Roll tal-Fojl tat-titanju Gr12
Deskrizzjoni tal-Prodotti
Isem:Pjanċa tat-titanju / Folja tat-titanju / Blokk tat-titanju
Densità:4.51g/ċm3
Standard: ASTM B265, ASME SB265, JIS H4600, GB/T 3621, AMS4911, AMS4919, ASTM F67, ASTM F136
Grad:Titanju Gr1 (3.7025), Gr2 (3.7035), Gr7 (3.7235), Gr12 (3.7105), Nikil UNS N02200 (2.4066), UNS N02201 (2.4068) Titanju Gr5, P270H, TP270C, TP340H, TP340C, TP480H, TP480C, eċċ.
Wiċċ: Bright, illustrat, Pickling, Tindif bl-aċidu, Sandblasting
Metodi ta' manifattura:Irrumblar bis-sħana u rolling kiesaħ
Temperatura tat-ttemprar:700 ~ 785 grad
Daqsijiet:
T (0.1mm - 2.0mm) * W (1250mm) * L (3000mm max)
T (3.0mm - 5.0mm) * W (1500mm) * L (7000mm max)
T (6.0mm - 60mm) * W (2500mm max) * L (7000mm max)
Applikazzjoni:
Petroleum, Metallurġija, Kimika, Farmaċija, Inġinerija tal-Baħar, Karozza tat-Tlielaq, Mutur, Roti, Yacht, Kampeġġ ta 'barra u Sports, Tagħmir. Industrija medika, aerospazjali, titjiriet spazjali, ajruplani, militari, eċċ.
Karatteristika:
1.Densità Baxxa u Qawwa Għolja
2.Reżistenza għall-Korrużjoni Eċċellenti
3.Reżistenza tajba għall-effett tas-sħana
4.Propjetajiet mekkaniċi tajbin
5.High Modulus ta 'elastiċità
6. Li ma jagħmilx ħsara u li ma jagħmilx ħsara lill-ambjent
7.Eċċellenti Bearing għal proprjetà krijoġenika
8.Nonmagnetic u Mhux-tossiċi
9.Good proprjetajiet termali
Kompożizzjoni kimika
|
|
N |
C |
H |
Fe |
O |
Al |
V |
Pd |
Mo |
Ni |
|
|
Gr 1 |
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
/ |
/ |
/ |
/ |
/ |
|
|
Gr 2 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
/ |
/ |
/ |
|
|
Gr 3 |
0.05 |
0.08 |
0.015 |
0.30 |
0.35 |
/ |
/ |
/ |
/ |
/ |
|
|
Gr 5 |
0.05 |
0.08 |
0.015 |
0.40 |
0.20 |
5.5~6.75 |
3.5~4.5 |
/ |
/ |
/ |
|
|
Gr 7 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
0.12~0.25 |
/ |
/ |
|
|
Gr 9 |
0.03 |
0.08 |
0.015 |
0.25 |
0.15 |
2.5~3.5 |
2.0~3.0 |
/ |
/ |
/ |
|
|
Gr12 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
/ |
0.2~0.4 |
0.6~0.9 |
|
Prodotti pprovduti minn GNEE
| Prodott Prinċipali | Gradi Komuni (ASTM) | Speċifikazzjonijiet Standard | Trattament tal-wiċċ Komuni |
|---|---|---|---|
| Tubu tat-titanju (Mingħajr saldatura & Iwweldjat) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD:3mm - 150 mm Ħxuna tal-ħajt:0.5mm - 10 mm Tul:Sa 6000 mm (personalizzabbli) Standards: ASTM B337, ASTM B338 |
• Illustrat (Mera / Satin) • Imnaddfin • Ittemprat • Sandblasted |
| Folja/Pjanċa tat-titanju (Irrumblati bil-kiesaħ / Irrumblati bis-sħana) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Ħxuna:0.1mm - 50 mm Wisa':500mm - 1500 mm Tul:1000mm - 3000 mm Standards: ASTM B265 |
• Illustrat (Nru.4, BA, Mera) • Imnaddfin • Ittemprat • Sandblasted • Brushed |
| Wajer tat-titanju | Gr1, Gr2, Gr5, Gr7 | Dijametru:0.1mm - 6.0 mm Formola:Coil, Tul Straight Standards: ASTM B863, F67, F136 |
• Ittemprat & Imnaddfin • Bright (Nadif) • Ossidizzat |
| Bar/Virga tat-titanju (Tond, Hex, Pjazza) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Dijametru (Tond):3mm - 200 mm Daqs Hex/kwadru:4mm - 100 mm Tul:1000mm - 3000 mm (jew maqtugħa-sad-daqs-) Standards: ASTM B348 |
• Imdawwar/Imqaxxar • Illustrat (Art bla ċentru) • Ittemprat • Ossidu Iswed |
| Fojl tat-titanju | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Ħxuna:0.03mm - 0.1 mm Wisa':50mm - 500 mm Standards: ASTM B265 |
• Ttemprat Bright (BA) • Cold Rolled |
| Partijiet tal-Maċinazzjoni CNC tat-titanju | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Kapaċità:Komponenti tad-dwana bbażati fuq tpinġijiet tal-klijenti. Proċessi:Tħin, Tidwir, Tħaffir, Tapping, eċċ. |
• Kif-Makna • Deburred • Illustrat / Tumbled • Anodizzar (Kulur, Iswed) • Sandblasted • Passivazzjoni |
